CNC plasma cutting machine | |
1.Smart design,stable operation | |
2.Electric height adjustment | |
3.High precision | |
4.Prompt shippment | |
CNC plasma cutting machine: | |
This type of cutting machine for high cantilever structure to solve the large-size CNC cut parts; transverse effective cutting width of 2m, the longitudinal section may need to configure the multi-rail. Can be configured according to user requirements flame or plasma cutting mode, and the corresponding increase in system configuration; using linear guide, side drive. | |
Parameters: | |
Cross Beam Length | 2700mm |
Longitudinal Rail Length | 3000mm |
Effective Cutting Width (X axis) | 2000mm |
Effective Cutting Length (Y axis) | 2200mm |
Cutting Mode | Flame only; Plasma only |
Drive Mode | Single-side |
Drive Method | Rack and pinion drive for X and Y axes |
Flame Cutting Thickness | 6-200mm |
Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
Cutting Speed | 0-3500mm per minute |
Moving Precision | 0.01mm per step |
Power Source | 220V 50Hz 500-1000W |
Cutting Gas | Acetylene, Propane |
Plasma Gas | Pressed air, Oxygen, N2 |
Torch Height Controller | Electromotion bottom |
CNC plasma cutting machine LHXB-3