Click on the image to check the artwork
| Cantilever type CNC Cutting Machine | |
| 1.Smart design. | |
| 2.Electric height adjustment. | |
| 3.High precision. | |
| 4.Prompt shippment. | |
| Cantilever type CNC Cutting Machine | |
| The model for the cantilever structure, the use of all steel heavy rail design, hence, have run a smooth, efficient cutting, cutting accuracy and good features; transverse effective cutting width of 2.2 meters, more than longitudinal sections need to be configured according to user guide. Can be configured according to user requirements flame or plasma cutting, and the corresponding automatic adjusting system.. | |
| Parameters | |
| Longitudinal Rail Length | 4m |
| Effective Cutting Width (X axis) | 2.2m |
| Effective Cutting Length (Y axis) | 3m |
| Cutting Mode | Flame only; Plasma only |
| Drive Mode | Single-side |
| Drive Method | Rack and pinion drive for X and Y axes |
| Flame Cutting Thickness | 6-200mm |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
| Cutting Speed | 0-3500mm per minute |
| Moving Precision | 0.01mm per step |
| Power Source | 220V 50Hz 500-1000W |
| Cutting Gas | Acetylene, Propane |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Torch Height Controller | Electromotion bottom |